MT1-PA Series Conductive Thermoplastic hose

TECHNICAL FEATURES

Metric

Code	inch	mm	DN	mm	bar	bar	mm	g/m	Ferrule Code
MT113000	1/8"	3.5	3	7.5	375	500	30	73	BP18MT1
MT123000	3/16"	4.8	5	10.0	350	467	30	127	BP316MT1
MT133000	1/4"	6.4	6	11.9	300	400	40	157	BP14MT1
MT143000	5/16"	8.0	8	14.0	240	320	50	195	BP516R7V
MT153000	3/8"	9.7	10	16.0	225	300	60	241	BP38R7V
MT163000	1/2"	13.0	12	19.2	190	254	75	299	BP12R7V
MT173000	5/8"	16.3	16	23.3	150	200	110	384	BP58R7V
MT183000	3/4"	19.2	19	25.5	130	174	150	429	BP34R7V
MT193000	1"	25.6	25	32.5	105	140	185	547	BP1R7V
MT1103000	1"1/4	32.0	32	40.0	70	94	290	842	BP114JC7

TECHNICAL FEATURES

Technical-constructive features:
Inner core in polyamide, reinforcement in high tensile steel braid and exterior covering in polyamide, very resistant to aggressive chemicals, micro perforated on request for the conduction of air and compatible gases.

Applications:
hoses of the MT1-PA series have been created for hydraulic use and for the high pressure conduction of Polyols, Solvents, Paints and compatible gases in chemically aggressive environments.

Working temperature:
from -40°C to +100°C from -40°F to +212°F.
Max. working temperature of air, water and water-based fluids is + 70°C (+158°F).

Working pressure:
Safety ratio 1:4 for DYNAMIC pressure
Safety ratio 1:3 for STATIC pressure

Vacuum rating:
0.93 bar; 700 mm Hg

Specifications:
Hoses meet or exceed pressures under SAE 100R1 - EN 853 1st, 1SN - EN 857 1SC Standards.