ZEC S.p.A.
Via Lungolorno 11 - 42052 Colorno (PR) - Italia
Tel. 0521 816631 - Fax 0521 816772
info@zecspa.com - www.zecspa.com
 
Capitale sociale: Euro 1.000.000
C.F., P.IVA e n. Iscr. Reg. Imprese Parma: IT01720400348
Numero REA: PR - 173914

Polyurethane type SH90 tubing

  • PRESSURE FROM 7 TO 12 BAR
  • COMPLIANT WITH FDA 21 CFR,
  • WORKING TEMPERATURE FROM -20°C TO +60°C
  • FOR PNEUMATIC APPLICATIONS
  • FOR FOOD APPLICATIONS
  • SHORE A 90 HARDNESS

 

DATA SHEET

TECHNICAL FEATURES

Pneumatics Low pressure Air Breathing Air Hydraulic oil Oil/grease for lubrication Edible products

TECHNICAL FEATURES

Metric

 
Code mm mm mm bar mm g/m

Colors available

 m

PUS42*

 2

4

1

12

8

11,1

 B-N

100

PUS64*

 4

6

1

8

10

18,5

 B-N

100

PUS85*

 5

8

1,5

11

20

36,1

 B-N

100

PUS107*

 7

10

1,5

8

25

47,2

 B-N

100

PUS128*

 8

12

2

7

35

74,1

 T-B-N

100
T : Neutral
N : Black
B : Blue

 

TECHNICAL FEATURES 

Technical-constructive features:
Polyurethane tubing ester based. Shore A 90 hardness. Improved flexibility for applications with small bending radii.
Excellent elastic memory and abrasion resistance. Black colour recommended for outdoor applications.

Applications:
Industrial automation, compressed air circuits in food sector, hydraulics and lubricating oil conductions.
Suitable for installing inside energy chains.

Working temperature: 
from -20° to +60°C. 

Safety ratio:
1:3

Specifications:
Tubing comply with FDA 21 CFR 177.2600. Raw materials comply with Regulation EU 10/2011.

It is end user responsibility to check the updated Declaration of Conformity on the reserved area. 

NB: There is an * in the code. This should be replaced with the color code of the tubing. 


BURST PRESSURE CORRECTION FACTOR ACCORDING TO TEMPERATURE  

 

TECHNICAL FEATURES OF POLYURETHANES

General properties

 

Standard

U.M.

POLYURETHANE Typical values
SH 98 SH90 Transparent H

Density

DIN 53479

g/cm3

1,22

1,21

1,19

1,16

Hardness

DIN 53505

Shore A

Shore D

98

50

91

---

95

49

---

52

Tensile stress at break

DIN 53504

MPa

55

55

40

45

Elongation at break

DIN 53504

%

500

550

515

470

Charpy impact

- unnotched 23°C

- unnotched -30°C

ISO 179

kj/m2

NC

18

NC

NC

---

---

Abrasion resistance

DIN 53516

mm3

25

30

20

25

OPTIONAL

  • Color
  • Packing
  • Long Length

NORMATIVE

  • EU 10/2011
  • EU 1935/2004
  • FDA 21 CFR

For any further information about the optional items, please contact the sales office ()