ZEC S.p.A.
Via Lungolorno 11 - 42052 Colorno (PR) - Italia
Tel. 0521 816631 - Fax 0521 816772
info@zecspa.com - www.zecspa.com
Capitale sociale: Euro 1.000.000
C.F., P.IVA e n. Iscr. Reg. Imprese Parma: IT01720400348
Numero REA: PR - 173914
TECHNICAL FEATURES
Metric
Code |
inch |
mm |
DN |
mm |
bar |
bar |
mm |
g/m |
Ferrule Code |
OL717001 |
1/8" |
3.5 |
3 |
8.5 |
230 |
240 |
25 |
57 |
BP18R7 |
OL78947001 |
5/32" |
4.0 |
4 |
8.9 |
250 |
260 |
25 |
58 |
BP532R7 |
OL727001 |
3/16" |
4.8 |
5 |
10.0 |
210 |
224 |
30 |
73 |
BP316R7 |
OL737001 |
1/4" |
6.4 |
6 |
11.8 |
200 |
220 |
35 |
90 |
BP14R7 |
OL747001 |
5/16" |
8.0 |
8 |
14.3 |
190 |
220 |
45 |
128 |
BP516R7V |
OL757001 |
3/8" |
9.7 |
10 |
16.0 |
175 |
210 |
55 |
155 |
BP38R7V |
OL767001 |
1/2" |
13.0 |
12 |
20.3 |
140 |
185 |
75 |
219 |
BP12R7V |
OL777001 |
5/8" |
16.0 |
16 |
23.5 |
105 |
140 |
120 |
277 |
BP58R7V |
OL787001 |
3/4" |
19.2 |
19 |
26.5 |
90 |
120 |
145 |
330 |
BP34R7V |
OL797001 |
1" |
25.6 |
25 |
33.6 |
70 |
90 |
200 |
403 |
BP1R7V |
TECHNICAL FEATURES
Technical-constructive features:
Inner core in thermoplastic polyester, reinforcement in polyester textile and exterior covering in orange antiabrasion polyurethane not micro perforated, stabilized against UV rays and resistant to ozone, microorganisms and hydrolysis, suitable for outdoor applications in wet and
saline environments.
Applications:
The Non-Conductive OL7 series hoses have been created for medium pressure hydraulic use for applications requiring high electrical isolation. These hoses meet SAE J517 Standard §20.4.1 for less than 50μA leakages under 250.000 V/m, suitable for air traveling platforms.
Working temperature:
from -54°C to +100°C from -65°F to +212°F.
Max. working temperature of water and water-based fluids is + 70°C (+158°F).
Working pressure:
Safety ratio 1:4 is required in the case in which the breaking of the tubing may cause the rig or the load lifting device or both to move.
Safety ratio 1:3 is acceptable in the case in which the breaking of the tubing does not cause the aerial lifting devices to move.
SAE Standard requires Safety ratio 1:4.
Vacuum rating:
0.93 bar; 700 mm Hg
Specifications:
Hoses meet or exceed SAE J517 sect. SAE 100R7 – ISO 3949 - MSHA Standards and comply with the requirements of the ANSI A92.2 Standard for air traveling platforms.
*The water-proof feature of the cover means that the hose is especially suitable for wet and saline environments where extreme temperature changes occur.
For any further information about the optional items, please contact the sales office ()