Thermoplast-Schlauch für Lebensmittel Serie AT8S Breathing Air - Waterproof Cover*
DATENBLATT
Code |
inch |
mm |
DN |
mm |
bar |
mm |
g/m |
Ferrule Code |
Inserto / Tail |
AT8S27100 |
3/16" |
4.8 |
5 |
10.5 |
413 |
35 |
80 |
BPI316R7 |
TL |
AT8S37100 |
1/4” |
6.4 |
6 |
12.7 |
413 |
50 |
100 |
BPI14MT1 |
O |
AT8S57100 |
3/8” |
9.7 |
10 |
16.5 |
413 |
75 |
149 |
BPI38R7V |
O |
AT8S67100 | 1/2" | 13.0 | 12 | 22.0 | 413 | 110 | 287 | BPI12R9R | TL |
Code |
inch |
-dash |
mm |
inch |
psi |
inch |
lbs/ft |
Ferrule Code |
Inserto / Tail |
AT8S27100 |
3/16" |
-3 |
4.8 |
0.413 |
6000 |
1.38 |
0.054 |
BPI316R7 |
TL |
AT8S37100 |
1/4” |
-4 |
6.4 |
0.500 |
6000 |
1.97 |
0.067 |
BPI14MT1 |
O |
AT8S57100 |
3/8” |
-6 |
9.7 |
0.650 |
6000 |
2.95 |
0.100 |
BPI38R7V |
O |
AT8S67100 | 1/2" | -8 | 13.0 | 0.866 | 6000 | 4.33 | 0.193 | BPI12R9R | TL |
TECHNISCHE EIGENSCHAFTEN
Technisch-konstruktive Eigenschaften:
Innenschlauch aus thermoplastischem Polymer geeignet für den Kontakt mit Lebensmitteln und Atemluft, Druckträger aus doppeltem Aramidfasergeflecht und Außenschicht aus abriebfestem und hydrolysebeständigem Polyurethan, stabilisiert für Anwendungen in besonders feuchten und salzhaltigen Umgebungen, UV-Strahlen-stabilisiert und beständig gegen Mikroorganismen, mikroperforiert für den Durchlass von Luft und kompatiblen Gasen.
Anwendungsbereiche:
Die Schlauchleitungen der Serie AT8S BREATHING AIR wurden zur Förderung von Fluiden bei hohem Druck für Druckluftstationen und SCBA-Austausch entwickelt, wo ein für den Kontakt mit Lebensmitteln geeigneter Innenschlauch-Werkstoff gefordert ist.
Der Schlauch ist nicht geeignet für den Einsatz in der Medizin, in der Pharmazeutik und mit alkoholhaltigen Lebensmitteln und explosiven Gasen.Für die Einsatz mit Hochdruck-Sauerstoff beachten Sie bitte die Anwendungsempfehlungen, die Sie im reservierten Bereich unserer Website herunterladen können.
Betriebstemperatur:
Von –40°C bis +82°C
von -40°F bis +180°F
Bei Luft, Wasser und Fluiden auf Wasserbasis beträgt die maximale Betriebstemperatur + 70°C. (+158°F).
Betriebsdruck:
Sicherheitsverhältnis 1:4
Maximaler Unterdruckwert:
0.93 bar. 700 mm Hg
Spezifikationen:
CGA G-7.1-2004 Grade E Breathing Air Standards, NFPA 1901.
EU-Verordnung 10/2011, FDA 21 CFR 177.2600
Die Schlauchleitungen erfüllen oder übertreffen die Anforderungen der Normen SAE J517 Abs. SAE 100R8 - ISO 3949 (ausser 1/4")
DNV-GL-Zulassung. MSHA Standards.
Es liegt in der Verantwortung des Anwenders, die entsprechende aktuelle Konformitätserklärung für den Einsatz mit Lebensmitteln im reservierten Bereich der Website zu prüfen.
*Die Waterproof-Eigenschaft der Ummantelung bedeutet, dass der Schlauch besonders geeignet für Anwendungen in feuchten, salzhaltigen und starken thermischen Schwankungen ausgesetzten Umgebungen ist.
OPTIONAL
Bezüglich weiterer Information zu den Optionals nehmen Sie bitte Kontakt mit der Verkaufsabteilung auf. (sales@zecspa.com)
ZUBEHÖR
Eigenschaften |
Art-Nr. PMZ46 |
Art-Nr. PPZ46 |
Pressdruck |
100 t |
100 t |
Kapazität |
1" 2sp |
1" 2sp |
max. Press-Ø |
46 mm * |
46 mm * |
Spannbacken |
Ø + 20 mm |
Ø + 20 mm |
90°-Fittings bei 90° |
3/8" |
3/8" |
Druckluftversorgung |
nein |
max. 7 bar |
Abmessungen L x B x H |
300x390x280 mm |
400x390x280 mm |
Gewicht |
32 kg |
36 kg |
max. Kraft auf den Hebel |
30 kg |
--- |
Einfachwirkender Zylinder |
ja |
ja |
Spannbacken-Aufnahmekasten |
ja |
ja |
Öl |
ja |
ja |
Spezialspannbacken |
Optional |
Optional |
Spannbackenaustauschwerkzeug |
Optional |
Optional |
* |
mit Spezialspannbacken |
mit Spezialspannbacken |
Chemical Resistance |
|
Acid, Diluite |
Good |
Acid, Concentrated |
Poor to Fail |
Acid, Organic (diluite) |
Good |
Acid, Organic (concentrated) |
Poor |
Acid, Inorganic |
Fair to Good |
Alcohol’s |
Fair to Good |
Aldehydes |
Poor to fail |
Alkalies, Diluite |
Good |
Alkalies, Concentrated |
Poor to Good |
Amines |
Poor |
Animal & Vegetable Oils |
Good to Excellent |
Brake Fluids, Non-Petroleum Based |
Poor |
Diester Oils |
Fair to |
Esters, Alkyl Phosphate |
Poor |
Esters, Aryl Phosphate |
Poor to Fair |
Ethers |
Poor |
Fuel, Aliphatic Hydrocarbon |
Good to Excellent |
Fuel, Aromatic Hydrocarbon |
Fair to Good |
Fuel, Extended (Oxygenated) |
Fair to Good |
Halogenated Solvents |
Poor |
Hydrocarbon, Halogenated |
Poor to Fair |
Ketones |
Poor |
Lacquer Solvents |
Fair |
LP Gases & Fuel Oils |
Excellent |
Minelal Oils |
Excellent |
Oil Resistant |
Good to Excellent |
Petroleum Aromatic |
Good |
Petroleum Non-Aromatic |
Excellent |
Refrigerant Ammonia |
Good |
Silicone Oil |
Good |
Solvent Resistant |
Good to Excellent |
|
|
Thermal Properties |
|
Low Temperature Range |
- 55°C to - 15°C |
Minimun for Continuous Use (static) |
- 40°C |
Brittle Point |
- 55°C to - 15°C |
High Temperature Range |
+ 100°C to + 125°C |
Maximum for Continuous Use (static) |
+ 125°C |
|
|
Environmental Performance |
|
Colorability |
Excellent |
Flame Resistance |
Poor |
Gas Permeability |
Fair to Excellent |
Odor |
Good |
Ozone Resistance |
Fair to Good |
Oxidation Resistance |
Good |
Radioation Resistance |
Fair to Good |
Steam Resistance |
Fair to Good |
Sunlight Resistance |
Poor to Good |
Taste Retention |
Fair to Good |
Weather Resistance |
Fair to Good |
Water Resistance |
Good to Excellent |
Art.-Nr.
|
Außendurchmesser (mm) |
mittlere Stärke (mm) |
Bandbreite (mm) |
Gewicht (g/m) |
für Schlauchdurchmesser (mm) |
GS128 |
12 |
1,7 |
10 |
46 |
10÷17 |
GS1612 |
16 |
1,8 |
12 |
76 |
12÷22 |
GS2016 |
20 |
1,8 |
14,5 |
86 |
16÷27 |
GS2520 |
25 |
2 |
21 |
112 |
22÷35 |
GS3227 |
32 |
2 |
24 |
177 |
27÷43 |
GS4036 |
40 |
2,5 |
30 |
217 |
33÷55 |
GS5044 |
50 |
3 |
35 |
278 |
42÷64 |
GS6356 |
63 |
3,5 |
40 |
588 |
52÷75 |
GS7567 |
75 |
3,4 |
40 |
813 |
65÷96 |
GS9080 |
90 |
5 |
45 |
1033 |
80÷125 |
GS110100 |
110 |
5,5 |
55 |
1200 |
97÷150 |
Article code |
Width (mm) |
Ø (mm) |
Weight (g/m) |
Lenght (mt) |
GT35* |
35 |
20 |
27 |
100 |
GT40* |
40 |
22 |
32 |
100 |
GT45* |
45 |
25 |
34 |
100 |
GT50* |
50 |
28 |
38 |
100 |
GT55* |
55 |
32 |
42 |
100 |
GT60* |
60 |
35 |
45 |
100 |
GT65* |
65 |
38 |
48 |
100 |
GT80* |
80 |
45 |
60 |
100 |
GT90* |
90 |
50 |
65 |
100 |
GT120* |
120 |
70 |
96 |
100 |
GT150* |
150 |
90 |
112 |
100 |
Ferrule Code |
Dimensions (mm) |
||
d | D | L | |
BPL1922 | 19 | 22 | 25 |
BPL2225 | 22 | 25 | 30 |
BPL2528 | 25 | 28 | 30 |
BPL2730 | 27 | 30 | 33 |
BPL2932 | 29 | 32 | 34 |
BPL3235 | 32 | 35 | 36 |
BPL3538 | 35 | 38 | 36 |
BPL3740 | 37 | 40 | 38 |
BPL3942 | 39 | 42 | 40 |
BPL4245 | 42 | 45 | 42 |
BPL4650 | 46 | 50 | 45 |
BPL5155 | 51 | 55 | 48 |
BPL5660 | 56 | 60 | 50 |
BPL6670 | 66 | 70 | 54 |
BPL7783 | 77 | 83 | 64 |
ZEC GT Textile Sleeves are particularly suitable for hydraulic and pneumatic applications, containing single and multiple tubings/hoses.
|
Fig. 1 – Abrasion Test in accordance with UNI ISO 6945 Standard. |
|
Fig. 2 - a) Before the burst Fig. 2 - (b) After the burst |
GT Textile Sleeves have obtained the approval from the Mine Safety and Health Administration by the U.S. Department of Labor with marking "MSHA IC332-08".
Art.-Nr. |
Innen-Ø (mm) |
Silikonstärke (min.) (mm) |
Rollenlänge (m) |
GFVS12 |
12 |
1 |
15 |
GFVS15 |
15 |
1 |
15 |
GFVS20 |
20 |
1 |
15 |
GFVS25 |
25 |
1 |
15 |
GFVS30 |
30 |
1 |
15 |
GFVS38 |
38 |
1 |
15 |
GFVS40 |
40 |
1 |
15 |
GFVS45 |
45 |
1 |
15 |
GFVS50 |
50 |
1 |
15 |
GFVS60 |
60 |
1 |
15 |
GFVS65 |
65 |
1 |
15 |
Teil-Nr. |
Innen-Ø (mm) |
Stärke (mm) |
Gewicht (g/m) |
Rollenlänge (m) |
|
normal |
verstärkt |
||||
GPVC10 |
- - - |
10 |
0,5 |
26 |
125 |
GPVC16 |
- - - |
16 |
0,5 |
39 |
100 |
GPVC18 |
- - - |
18 |
0,5 |
52 |
100 |
GPVC20 |
- - - |
20 |
0,6 |
58 |
100 |
- - - |
GPVCS20 |
20 |
1,5 |
122,5 |
100 |
GPVC22 |
- - - |
22 |
0,6 |
63 |
100 |
- - - |
GPVCS23 |
23 |
1,5 |
140 |
100 |
GPVC25 |
- - - |
25 |
0,6 |
72 |
100 |
- - - |
GPVCS25 |
25 |
1,5 |
151 |
100 |
- - - |
GPVCS27 |
27 |
1,5 |
164 |
100 |
GPVC28 |
- - - |
28 |
0,6 |
82 |
100 |
GPVC30 |
- - - |
30 |
0,6 |
87 |
100 |
- - - |
GPVCS30 |
30 |
1,5 |
180 |
100 |
- - - |
GPVCS32 |
32 |
1,5 |
191 |
50 |
GPVC33 |
- - - |
33 |
0,7 |
104 |
50 |
- - - |
GPVCS33 |
33 |
1,5 |
197 |
50 |
GPVC38 |
- - - |
38 |
0,7 |
135 |
50 |
- - - |
GPVCS38 |
38 |
1,5 |
225 |
50 |
GPVC40 |
- - - |
40 |
0,7 |
141 |
50 |
- - - |
GPVCS40 |
40 |
1,5 |
241 |
50 |
GPVC45 |
- - - |
45 |
0,7 |
144 |
50 |
- - - |
GPVCS48 |
48 |
1,5 |
282 |
50 |
GPVC50 |
- - - |
50 |
0,7 |
167 |
50 |
GPVC55 |
- - - |
55 |
0,7 |
184 |
50 |
Art.-Nr. |
A |
B mm |
C mm |
D mm |
HBR20 | 15.6 | 17.8 | 134 | 15.9 |
HBR40 | 17.0 | 19.2 | 146 | 17.2 |
HBR60 | 19.0 | 21.6 | 163 | 19.3 |
HBR80 | 20.7 | 23.5 | 177 | 21.0 |
HBR100 | 22.1 | 25.3 | 197 | 22.5 |
Art.-Nr. |
Außen-Ø x Innen-Ø x Breite |
Öffnungs-Ø |
Tara |
Spulenwickler |
IBP270120200 |
275x125x200 mm |
32 mm |
0,5 kg |
Typ 1, Nr. 12 mit Adapter |
Fassungsvermögen Spule |
|
Schlauch-Ø |
reales Fassungsvermögen m |
2 |
2000 |
2.5 | 1250 |
3 | 900 |
4 | 500 |
5 | 300 |
6 | 200 |
7 | 150 |
8 | 100 |
FR5 |
reales Fassungsvermögen m |
Test - DN2 |
max 200 |
5/32" - DN4 | max 100 |
Art.-Nr. |
AUSSEN-Ø x INNEN-Ø x BREITE |
IBL500160200 |
500x160x200 |
IBL500160300 |
500x160x300 |
IBL700400470 |
700x400x470 |
IBL800400470 |
800x400x470 |
IBLDIN900 |
900x450x470 |
IBLDIN1000 |
1000x500x580 |
IBLDIN1200 |
1200x600x600 |
IBLDIN1400 | 1400x710x750 |
IBLDIN1600 | 1600x710x900 |
Art.-Nr. |
AUSSEN-Ø x INNEN-Ø x BREITE |
IBC470250300 |
470x250x300 |
IBC550400400 |
550x400x400 |
IBC550400500 |
550x400x500 |
IBC800400400 |
800x400x400 |
IBC900550190 |
900x550x190 |
IBC1060600320 |
1060x600x320 |
IBC1060600500 |
1060x600x500 |