Schlauch PTFE INOX Serie IP
DATENBLATT
Code | inch | mm | DN | mm | mm | bar | mm | g/m | Ferrule Code (*) |
PTFE316IP |
3/16" |
4.8 |
5 |
7.4 |
0.7 |
200 |
35 |
69 |
BP316PTFEIP |
PTFE14IP |
1/4" |
6.35 |
6 |
8.9 |
0.7 |
175 |
45 |
87 |
BP14PTFEIP |
PTFE516IP |
5/16" |
8.0 |
8 |
10.9 |
0.7 |
150 |
50 |
127 |
BP516PTFEIP |
PTFE38IP |
3/8" |
9.5 |
10 |
12.4 |
0.7 |
135 |
55 |
145 |
BP38PTFEIP |
PTFE12IP |
1/2" |
12.7 |
12 |
15.7 |
0.7 |
120 |
70 |
212 |
BP12PTFEIP |
PTFE58IP |
5/8" |
16.0 |
16 |
19.1 |
0.7 |
100 |
130 |
260 |
BP58PTFEIP |
PTFE34IP |
3/4" |
19.0 |
19 |
22.2 |
0.8 |
90 |
190 |
321 |
BP34PTFEIP |
PTFE1IP |
1" |
25.4 |
25 |
29.3 |
0.8 |
65 |
270 |
450 |
BP1PTFEIP |
(*) Possibilità di boccole in acciaio inox / Stainless steel ferrules available
Code | inch | - dash | mm | inch | inch | psi | inch | lbs/ft | Ferrule Code (*) |
PTFE316IP |
3/16" |
-3 | 4.8 |
0.29 |
0.027 |
2900 |
1.37 |
0.046 |
BP316PTFEIP |
PTFE14IP |
1/4" |
-4 | 6.35 |
0.34 |
0.027 |
2540 |
1.77 |
0.058 |
BP14PTFEIP |
PTFE516IP |
5/16" |
-5 | 8.0 |
0.43 |
0.027 |
2170 |
1.96 |
0.085 |
BP516PTFEIP |
PTFE38IP |
3/8" |
-6 | 9.5 |
0.47 |
0.027 |
1960 |
2.16 |
0.097 |
BP38PTFEIP |
PTFE12IP |
1/2" |
-8 | 12.7 |
0.61 |
0.027 |
1740 |
2.75 |
0.142 |
BP12PTFEIP |
PTFE58IP |
5/8" |
-10 | 16.0 |
0.75 |
0.027 |
1450 |
5.11 |
0.175 |
BP58PTFEIP |
PTFE34IP |
3/4" |
-12 | 19.0 |
0.87 |
0.031 |
1310 |
7.48 |
0.216 |
BP34PTFEIP |
PTFE1IP |
1" |
-16 | 25.4 |
1.14 |
0.031 |
940 |
10.62 |
0.302 |
BP1PTFEIP |
(*) Possibilità di boccole in acciaio inox / Stainless steel ferrules available
TECHNISCHE EIGENSCHAFTEN
Technisch-konstruktive Eigenschaften:
Innenschlauch aus PTFE und Druckträger aus Edelstahlgeflecht AISI 304.
Anwendungsbereiche:
Die Schäuche der Serie PTFE wurden hauptsächlich zur Förderung von Lacken, Ölen, Luft, Fluiden auf Wasserbasis allgemein und Dampf bei hohem Druck konzipiert.
Diese Schläuche leiten die sich beim Durchfluss von nicht leitfähigen Medien ansammelnden elektrostatischen Ladungen nicht ab.
Betriebstemperatur:
von -60°C bis +260°C
von -76°F bis +500°F
Spezifikationen:
EU-Verordnung 1935/2004, EU-Verordnung 10/2011. FDA 21 CFR 177.1550. Ital. Ministerialdekret Nr. 174 vom 06/04/2004 für die Verwendung mit Trinkwasser.
Es liegt in der Verantwortung des Anwenders, die entsprechende aktuelle Konformitätserklärung für den Einsatz mit Lebensmitteln im reservierten Bereich der Website zu prüfen.
KORREKTURSKALA DES DRUCKS IN ABHÄNGIGKEIT VON DER TEMPERATUR
OPTIONAL
Bezüglich weiterer Information zu den Optionals nehmen Sie bitte Kontakt mit der Verkaufsabteilung auf. (sales@zecspa.com)
ZUBEHÖR
Eigenschaften |
Art-Nr. PMZ46 |
Art-Nr. PPZ46 |
Pressdruck |
100 t |
100 t |
Kapazität |
1" 2sp |
1" 2sp |
max. Press-Ø |
46 mm * |
46 mm * |
Spannbacken |
Ø + 20 mm |
Ø + 20 mm |
90°-Fittings bei 90° |
3/8" |
3/8" |
Druckluftversorgung |
nein |
max. 7 bar |
Abmessungen L x B x H |
300x390x280 mm |
400x390x280 mm |
Gewicht |
32 kg |
36 kg |
max. Kraft auf den Hebel |
30 kg |
--- |
Einfachwirkender Zylinder |
ja |
ja |
Spannbacken-Aufnahmekasten |
ja |
ja |
Öl |
ja |
ja |
Spezialspannbacken |
Optional |
Optional |
Spannbackenaustauschwerkzeug |
Optional |
Optional |
* |
mit Spezialspannbacken |
mit Spezialspannbacken |
Chemical Resistance |
|
Acid, Diluite |
Good |
Acid, Concentrated |
Poor to Fail |
Acid, Organic (diluite) |
Good |
Acid, Organic (concentrated) |
Poor |
Acid, Inorganic |
Fair to Good |
Alcohol’s |
Fair to Good |
Aldehydes |
Poor to fail |
Alkalies, Diluite |
Good |
Alkalies, Concentrated |
Poor to Good |
Amines |
Poor |
Animal & Vegetable Oils |
Good to Excellent |
Brake Fluids, Non-Petroleum Based |
Poor |
Diester Oils |
Fair to |
Esters, Alkyl Phosphate |
Poor |
Esters, Aryl Phosphate |
Poor to Fair |
Ethers |
Poor |
Fuel, Aliphatic Hydrocarbon |
Good to Excellent |
Fuel, Aromatic Hydrocarbon |
Fair to Good |
Fuel, Extended (Oxygenated) |
Fair to Good |
Halogenated Solvents |
Poor |
Hydrocarbon, Halogenated |
Poor to Fair |
Ketones |
Poor |
Lacquer Solvents |
Fair |
LP Gases & Fuel Oils |
Excellent |
Minelal Oils |
Excellent |
Oil Resistant |
Good to Excellent |
Petroleum Aromatic |
Good |
Petroleum Non-Aromatic |
Excellent |
Refrigerant Ammonia |
Good |
Silicone Oil |
Good |
Solvent Resistant |
Good to Excellent |
|
|
Thermal Properties |
|
Low Temperature Range |
- 55°C to - 15°C |
Minimun for Continuous Use (static) |
- 40°C |
Brittle Point |
- 55°C to - 15°C |
High Temperature Range |
+ 100°C to + 125°C |
Maximum for Continuous Use (static) |
+ 125°C |
|
|
Environmental Performance |
|
Colorability |
Excellent |
Flame Resistance |
Poor |
Gas Permeability |
Fair to Excellent |
Odor |
Good |
Ozone Resistance |
Fair to Good |
Oxidation Resistance |
Good |
Radioation Resistance |
Fair to Good |
Steam Resistance |
Fair to Good |
Sunlight Resistance |
Poor to Good |
Taste Retention |
Fair to Good |
Weather Resistance |
Fair to Good |
Water Resistance |
Good to Excellent |
Art.-Nr.
|
Außendurchmesser (mm) |
mittlere Stärke (mm) |
Bandbreite (mm) |
Gewicht (g/m) |
für Schlauchdurchmesser (mm) |
GS128 |
12 |
1,7 |
10 |
46 |
10÷17 |
GS1612 |
16 |
1,8 |
12 |
76 |
12÷22 |
GS2016 |
20 |
1,8 |
14,5 |
86 |
16÷27 |
GS2520 |
25 |
2 |
21 |
112 |
22÷35 |
GS3227 |
32 |
2 |
24 |
177 |
27÷43 |
GS4036 |
40 |
2,5 |
30 |
217 |
33÷55 |
GS5044 |
50 |
3 |
35 |
278 |
42÷64 |
GS6356 |
63 |
3,5 |
40 |
588 |
52÷75 |
GS7567 |
75 |
3,4 |
40 |
813 |
65÷96 |
GS9080 |
90 |
5 |
45 |
1033 |
80÷125 |
GS110100 |
110 |
5,5 |
55 |
1200 |
97÷150 |
Article code |
Width (mm) |
Ø (mm) |
Weight (g/m) |
Lenght (mt) |
GT35* |
35 |
20 |
27 |
100 |
GT40* |
40 |
22 |
32 |
100 |
GT45* |
45 |
25 |
34 |
100 |
GT50* |
50 |
28 |
38 |
100 |
GT55* |
55 |
32 |
42 |
100 |
GT60* |
60 |
35 |
45 |
100 |
GT65* |
65 |
38 |
48 |
100 |
GT80* |
80 |
45 |
60 |
100 |
GT90* |
90 |
50 |
65 |
100 |
GT120* |
120 |
70 |
96 |
100 |
GT150* |
150 |
90 |
112 |
100 |
Ferrule Code |
Dimensions (mm) |
||
d | D | L | |
BPL1922 | 19 | 22 | 25 |
BPL2225 | 22 | 25 | 30 |
BPL2528 | 25 | 28 | 30 |
BPL2730 | 27 | 30 | 33 |
BPL2932 | 29 | 32 | 34 |
BPL3235 | 32 | 35 | 36 |
BPL3538 | 35 | 38 | 36 |
BPL3740 | 37 | 40 | 38 |
BPL3942 | 39 | 42 | 40 |
BPL4245 | 42 | 45 | 42 |
BPL4650 | 46 | 50 | 45 |
BPL5155 | 51 | 55 | 48 |
BPL5660 | 56 | 60 | 50 |
BPL6670 | 66 | 70 | 54 |
BPL7783 | 77 | 83 | 64 |
ZEC GT Textile Sleeves are particularly suitable for hydraulic and pneumatic applications, containing single and multiple tubings/hoses.
|
Fig. 1 – Abrasion Test in accordance with UNI ISO 6945 Standard. |
|
Fig. 2 - a) Before the burst Fig. 2 - (b) After the burst |
GT Textile Sleeves have obtained the approval from the Mine Safety and Health Administration by the U.S. Department of Labor with marking "MSHA IC332-08".
Art.-Nr. |
Innen-Ø (mm) |
Silikonstärke (min.) (mm) |
Rollenlänge (m) |
GFVS12 |
12 |
1 |
15 |
GFVS15 |
15 |
1 |
15 |
GFVS20 |
20 |
1 |
15 |
GFVS25 |
25 |
1 |
15 |
GFVS30 |
30 |
1 |
15 |
GFVS38 |
38 |
1 |
15 |
GFVS40 |
40 |
1 |
15 |
GFVS45 |
45 |
1 |
15 |
GFVS50 |
50 |
1 |
15 |
GFVS60 |
60 |
1 |
15 |
GFVS65 |
65 |
1 |
15 |
Teil-Nr. |
Innen-Ø (mm) |
Stärke (mm) |
Gewicht (g/m) |
Rollenlänge (m) |
|
normal |
verstärkt |
||||
GPVC10 |
- - - |
10 |
0,5 |
26 |
125 |
GPVC16 |
- - - |
16 |
0,5 |
39 |
100 |
GPVC18 |
- - - |
18 |
0,5 |
52 |
100 |
GPVC20 |
- - - |
20 |
0,6 |
58 |
100 |
- - - |
GPVCS20 |
20 |
1,5 |
122,5 |
100 |
GPVC22 |
- - - |
22 |
0,6 |
63 |
100 |
- - - |
GPVCS23 |
23 |
1,5 |
140 |
100 |
GPVC25 |
- - - |
25 |
0,6 |
72 |
100 |
- - - |
GPVCS25 |
25 |
1,5 |
151 |
100 |
- - - |
GPVCS27 |
27 |
1,5 |
164 |
100 |
GPVC28 |
- - - |
28 |
0,6 |
82 |
100 |
GPVC30 |
- - - |
30 |
0,6 |
87 |
100 |
- - - |
GPVCS30 |
30 |
1,5 |
180 |
100 |
- - - |
GPVCS32 |
32 |
1,5 |
191 |
50 |
GPVC33 |
- - - |
33 |
0,7 |
104 |
50 |
- - - |
GPVCS33 |
33 |
1,5 |
197 |
50 |
GPVC38 |
- - - |
38 |
0,7 |
135 |
50 |
- - - |
GPVCS38 |
38 |
1,5 |
225 |
50 |
GPVC40 |
- - - |
40 |
0,7 |
141 |
50 |
- - - |
GPVCS40 |
40 |
1,5 |
241 |
50 |
GPVC45 |
- - - |
45 |
0,7 |
144 |
50 |
- - - |
GPVCS48 |
48 |
1,5 |
282 |
50 |
GPVC50 |
- - - |
50 |
0,7 |
167 |
50 |
GPVC55 |
- - - |
55 |
0,7 |
184 |
50 |
Art.-Nr. |
A |
B mm |
C mm |
D mm |
HBR20 | 15.6 | 17.8 | 134 | 15.9 |
HBR40 | 17.0 | 19.2 | 146 | 17.2 |
HBR60 | 19.0 | 21.6 | 163 | 19.3 |
HBR80 | 20.7 | 23.5 | 177 | 21.0 |
HBR100 | 22.1 | 25.3 | 197 | 22.5 |
Art.-Nr. |
Außen-Ø x Innen-Ø x Breite |
Öffnungs-Ø |
Tara |
Spulenwickler |
IBP270120200 |
275x125x200 mm |
32 mm |
0,5 kg |
Typ 1, Nr. 12 mit Adapter |
Fassungsvermögen Spule |
|
Schlauch-Ø |
reales Fassungsvermögen m |
2 |
2000 |
2.5 | 1250 |
3 | 900 |
4 | 500 |
5 | 300 |
6 | 200 |
7 | 150 |
8 | 100 |
FR5 |
reales Fassungsvermögen m |
Test - DN2 |
max 200 |
5/32" - DN4 | max 100 |
Art.-Nr. |
AUSSEN-Ø x INNEN-Ø x BREITE |
IBL500160200 |
500x160x200 |
IBL500160300 |
500x160x300 |
IBL700400470 |
700x400x470 |
IBL800400470 |
800x400x470 |
IBLDIN900 |
900x450x470 |
IBLDIN1000 |
1000x500x580 |
IBLDIN1200 |
1200x600x600 |
IBLDIN1400 | 1400x710x750 |
IBLDIN1600 | 1600x710x900 |
Art.-Nr. |
AUSSEN-Ø x INNEN-Ø x BREITE |
IBC470250300 |
470x250x300 |
IBC550400400 |
550x400x400 |
IBC550400500 |
550x400x500 |
IBC800400400 |
800x400x400 |
IBC900550190 |
900x550x190 |
IBC1060600320 |
1060x600x320 |
IBC1060600500 |
1060x600x500 |