THERMOPLAST-SCHLAUCH SERIE OL5FL FLEX-FLOW
DATENBLATT
Code |
inch |
mm |
DN |
mm |
bar |
bar |
mm |
g/m |
Ferrule Code |
OL53#00*FLPU |
1/4" |
6.4 |
6 |
11.2 |
25 |
100 |
30 |
75 |
BP14PTFEI2T |
OL55#00*FLPU |
3/8" |
9.5 |
10 |
15.0 |
25 |
100 |
50 |
119 |
BP38PTFEIC |
OL56#00*FLPU |
1/2" |
12.7 |
12 |
19.1 |
20 |
80 |
70 |
181 |
BP12PTFEIC |
OL558#00*FLPU |
5/8" |
16.0 |
16 |
23.0 |
20 |
80 |
75 |
238 |
BP58PTFEIC |
OL58#00*FLPU |
3/4" |
19.0 |
20 |
26.0 |
20 |
80 |
110 |
283 |
BP34PTFEIC |
Code |
inch |
-dash |
mm |
inch |
psi |
psi |
inch |
lbs/ft |
Ferrule Code |
OL53#00*FLPU |
1/4" |
-4 |
6.4 |
0.441 |
363 |
1450 |
1.181 |
0.050 |
BP14PTFEI2T |
OL55#00*FLPU |
3/8" |
-6 |
9.5 |
0.590 |
363 |
1450 |
1.968 |
0.080 |
BP38PTFEIC |
OL56#00*FLPU |
1/2" |
-8 |
12.7 |
0.752 |
290 |
1160 |
2.756 |
0.122 |
BP12PTFEIC |
OL558#00*FLPU |
5/8" | -10 | 16.0 | 0.905 | 290 | 1160 | 2.953 | 0.160 | BP58PTFEIC |
OL58#00*FLPU |
3/4" | -12 | 19.0 | 1.024 | 290 | 1160 | 4.331 | 0.190 | BP34PTFEIC |
AVAILABLE VERSIONS |
black |
Orange |
Blue |
Red |
Green |
Yellow |
Multi-purpose #=7 |
- |
|
|
|||
Non-Conductive #=7 |
- |
|
- |
- |
- |
- |
Self-Extinguishing #=8 |
- |
- | - |
- |
- |
TECHNICSCHE EIGENSCHAFTEN
Technisch-konstruktive Eigenschaften:
Innenschlauch aus Polyurethan, Druckträger aus einem hochreißfesten Textilgeflecht, permanent mit der Innenschicht verschweißte Schlauchdecke aus abriebbeständigem, UV-stabilisiertem und mikroorganismen-beständigem Polyurethan..
Anwendungen:
Die Serie OL5FL Flex-Flow ist ideal für Pneumatikanwendungen und hydraulische Rücklaufleitungen, wo Flexibilität und geringe Biegeradien gefordert sind.
Die Schläuche sind in in den Ausführungen “Mehrzweck”, "nichtleitend" (Farbe orange, < 50 μA Leckstrom bei 250.000 V/m gem. SAE J517) und "selbstverlöschend" (Grad V0 gem. UL94) erhältlich.
Betriebstemperatur:
-30°C bis +80°C
Bei Medien auf Wasserbasis beträgt die maximale Betriebstemperatur + 70°C
Betriebsüberdruck:
Sicherheitsfaktor 1:4
Maximale Unterdruck:
0,93bar, 700mm Hg (27.6 inch Hg)
Farben und Optionen:
Farben: schwarz, orange, blau, rot, grün, gelb. Weitere Farben auf Anfrage.
Erhältlich als Einzel-, Zwillings- und Mehrfachschlauch.
Armaturen:
Zweiteilige Standard-Armaturen mit Pressfassungen oder einteilige Push-In-Armaturen (außer für den 1/4").
OPTIONAL
Bezüglich weiterer Information zu den Optionals nehmen Sie bitte Kontakt mit der Verkaufsabteilung auf. (sales@zecspa.com)
FITTINGS
DKR-90°
90°-ARMATUR MIT BSPP-INNENGEWINDE UND 60°-DICHTKEGEL FÜR OL5FL FLEX-FLOW
Part nr. |
Hose |
Thread T |
Cut-off C |
Drop H |
Hexagon E |
||||||
inch | -dash | mm | DN | inch | mm | inch | mm |
inch |
mm | ||
RFF903838 | 3/8" | -6 | 9.5 | 10 | 3/8"-19 | 0.83 | 21 | 1.10 | 28 | 0.75 | 19 |
RFF901212 |
1/2" | -8 | 12.7 | 12 | 1/2"-14 | 1.02 | 26 |
1.38 |
35 |
1.06 |
27 |
RFF903434 | 3/4" | -12 | 19.0 | 20 | 3/4"-14 | 1.46 | 37 |
1.81 |
46 |
1.26 |
32 |
DKR
90°-ARMATUR MIT BSPP-INNENGEWINDE UND 60°-DICHTKEGEL FÜR OL5FL FLEX-FLOW
Part nr. |
Hose |
Thread T |
Cut-off C |
Hexagon E |
|||||
inch | -dash | mm | DN | inch | mm |
inch |
mm | ||
RFFD3838 | 3/8" | -6 | 9.5 | 10 | 3/8"-19 | 0.39 | 10 | 0.75 | 19 |
RFFD1212 |
1/2" | -8 | 12.7 | 12 | 1/2"-14 | 0.51 | 13 |
1.06 |
27 |
RFFD3434 | 3/4" | -12 | 19.0 | 20 | 3/4"-14 | 0.63 | 16 |
1.26 |
32 |
AGR - ARMATUR MIT BSPP-AUSSENGEWINDE UND 60°-DICHTKONUS FÜR OL5FL FLEX-FLOW
Part nr. |
Hose |
Thread T |
Cut-off C |
Hexagon E |
|||||
inch | -dash | mm | DN | inch | mm |
inch |
mm | ||
RFMD3838 | 3/8" | -6 | 9.5 | 10 | 3/8"-19 | 0.87 | 10 | 0.87 | 22 |
RFMD1212 |
1/2" | -8 | 12.7 | 12 | 1/2"-14 | 0.98 | 13 |
1.06 |
27 |
RFMD3434 | 3/4" | -12 | 19.0 | 20 | 3/4"-14 | 1.06 | 16 |
1.26 |
32 |
ZUBEHÖR
Eigenschaften |
Art-Nr. PMZ46 |
Art-Nr. PPZ46 |
Pressdruck |
100 t |
100 t |
Kapazität |
1" 2sp |
1" 2sp |
max. Press-Ø |
46 mm * |
46 mm * |
Spannbacken |
Ø + 20 mm |
Ø + 20 mm |
90°-Fittings bei 90° |
3/8" |
3/8" |
Druckluftversorgung |
nein |
max. 7 bar |
Abmessungen L x B x H |
300x390x280 mm |
400x390x280 mm |
Gewicht |
32 kg |
36 kg |
max. Kraft auf den Hebel |
30 kg |
--- |
Einfachwirkender Zylinder |
ja |
ja |
Spannbacken-Aufnahmekasten |
ja |
ja |
Öl |
ja |
ja |
Spezialspannbacken |
Optional |
Optional |
Spannbackenaustauschwerkzeug |
Optional |
Optional |
* |
mit Spezialspannbacken |
mit Spezialspannbacken |
Chemical Resistance |
|
Acid, Diluite |
Good |
Acid, Concentrated |
Poor to Fail |
Acid, Organic (diluite) |
Good |
Acid, Organic (concentrated) |
Poor |
Acid, Inorganic |
Fair to Good |
Alcohol’s |
Fair to Good |
Aldehydes |
Poor to fail |
Alkalies, Diluite |
Good |
Alkalies, Concentrated |
Poor to Good |
Amines |
Poor |
Animal & Vegetable Oils |
Good to Excellent |
Brake Fluids, Non-Petroleum Based |
Poor |
Diester Oils |
Fair to |
Esters, Alkyl Phosphate |
Poor |
Esters, Aryl Phosphate |
Poor to Fair |
Ethers |
Poor |
Fuel, Aliphatic Hydrocarbon |
Good to Excellent |
Fuel, Aromatic Hydrocarbon |
Fair to Good |
Fuel, Extended (Oxygenated) |
Fair to Good |
Halogenated Solvents |
Poor |
Hydrocarbon, Halogenated |
Poor to Fair |
Ketones |
Poor |
Lacquer Solvents |
Fair |
LP Gases & Fuel Oils |
Excellent |
Minelal Oils |
Excellent |
Oil Resistant |
Good to Excellent |
Petroleum Aromatic |
Good |
Petroleum Non-Aromatic |
Excellent |
Refrigerant Ammonia |
Good |
Silicone Oil |
Good |
Solvent Resistant |
Good to Excellent |
|
|
Thermal Properties |
|
Low Temperature Range |
- 55°C to - 15°C |
Minimun for Continuous Use (static) |
- 40°C |
Brittle Point |
- 55°C to - 15°C |
High Temperature Range |
+ 100°C to + 125°C |
Maximum for Continuous Use (static) |
+ 125°C |
|
|
Environmental Performance |
|
Colorability |
Excellent |
Flame Resistance |
Poor |
Gas Permeability |
Fair to Excellent |
Odor |
Good |
Ozone Resistance |
Fair to Good |
Oxidation Resistance |
Good |
Radioation Resistance |
Fair to Good |
Steam Resistance |
Fair to Good |
Sunlight Resistance |
Poor to Good |
Taste Retention |
Fair to Good |
Weather Resistance |
Fair to Good |
Water Resistance |
Good to Excellent |
Art.-Nr.
|
Außendurchmesser (mm) |
mittlere Stärke (mm) |
Bandbreite (mm) |
Gewicht (g/m) |
für Schlauchdurchmesser (mm) |
GS128 |
12 |
1,7 |
10 |
46 |
10÷17 |
GS1612 |
16 |
1,8 |
12 |
76 |
12÷22 |
GS2016 |
20 |
1,8 |
14,5 |
86 |
16÷27 |
GS2520 |
25 |
2 |
21 |
112 |
22÷35 |
GS3227 |
32 |
2 |
24 |
177 |
27÷43 |
GS4036 |
40 |
2,5 |
30 |
217 |
33÷55 |
GS5044 |
50 |
3 |
35 |
278 |
42÷64 |
GS6356 |
63 |
3,5 |
40 |
588 |
52÷75 |
GS7567 |
75 |
3,4 |
40 |
813 |
65÷96 |
GS9080 |
90 |
5 |
45 |
1033 |
80÷125 |
GS110100 |
110 |
5,5 |
55 |
1200 |
97÷150 |
Article code |
Width (mm) |
Ø (mm) |
Weight (g/m) |
Lenght (mt) |
GT35* |
35 |
20 |
27 |
100 |
GT40* |
40 |
22 |
32 |
100 |
GT45* |
45 |
25 |
34 |
100 |
GT50* |
50 |
28 |
38 |
100 |
GT55* |
55 |
32 |
42 |
100 |
GT60* |
60 |
35 |
45 |
100 |
GT65* |
65 |
38 |
48 |
100 |
GT80* |
80 |
45 |
60 |
100 |
GT90* |
90 |
50 |
65 |
100 |
GT120* |
120 |
70 |
96 |
100 |
GT150* |
150 |
90 |
112 |
100 |
Ferrule Code |
Dimensions (mm) |
||
d | D | L | |
BPL1922 | 19 | 22 | 25 |
BPL2225 | 22 | 25 | 30 |
BPL2528 | 25 | 28 | 30 |
BPL2730 | 27 | 30 | 33 |
BPL2932 | 29 | 32 | 34 |
BPL3235 | 32 | 35 | 36 |
BPL3538 | 35 | 38 | 36 |
BPL3740 | 37 | 40 | 38 |
BPL3942 | 39 | 42 | 40 |
BPL4245 | 42 | 45 | 42 |
BPL4650 | 46 | 50 | 45 |
BPL5155 | 51 | 55 | 48 |
BPL5660 | 56 | 60 | 50 |
BPL6670 | 66 | 70 | 54 |
BPL7783 | 77 | 83 | 64 |
ZEC GT Textile Sleeves are particularly suitable for hydraulic and pneumatic applications, containing single and multiple tubings/hoses.
|
Fig. 1 – Abrasion Test in accordance with UNI ISO 6945 Standard. |
|
Fig. 2 - a) Before the burst Fig. 2 - (b) After the burst |
GT Textile Sleeves have obtained the approval from the Mine Safety and Health Administration by the U.S. Department of Labor with marking "MSHA IC332-08".
Art.-Nr. |
Innen-Ø (mm) |
Silikonstärke (min.) (mm) |
Rollenlänge (m) |
GFVS12 |
12 |
1 |
15 |
GFVS15 |
15 |
1 |
15 |
GFVS20 |
20 |
1 |
15 |
GFVS25 |
25 |
1 |
15 |
GFVS30 |
30 |
1 |
15 |
GFVS38 |
38 |
1 |
15 |
GFVS40 |
40 |
1 |
15 |
GFVS45 |
45 |
1 |
15 |
GFVS50 |
50 |
1 |
15 |
GFVS60 |
60 |
1 |
15 |
GFVS65 |
65 |
1 |
15 |
Teil-Nr. |
Innen-Ø (mm) |
Stärke (mm) |
Gewicht (g/m) |
Rollenlänge (m) |
|
normal |
verstärkt |
||||
GPVC10 |
- - - |
10 |
0,5 |
26 |
125 |
GPVC16 |
- - - |
16 |
0,5 |
39 |
100 |
GPVC18 |
- - - |
18 |
0,5 |
52 |
100 |
GPVC20 |
- - - |
20 |
0,6 |
58 |
100 |
- - - |
GPVCS20 |
20 |
1,5 |
122,5 |
100 |
GPVC22 |
- - - |
22 |
0,6 |
63 |
100 |
- - - |
GPVCS23 |
23 |
1,5 |
140 |
100 |
GPVC25 |
- - - |
25 |
0,6 |
72 |
100 |
- - - |
GPVCS25 |
25 |
1,5 |
151 |
100 |
- - - |
GPVCS27 |
27 |
1,5 |
164 |
100 |
GPVC28 |
- - - |
28 |
0,6 |
82 |
100 |
GPVC30 |
- - - |
30 |
0,6 |
87 |
100 |
- - - |
GPVCS30 |
30 |
1,5 |
180 |
100 |
- - - |
GPVCS32 |
32 |
1,5 |
191 |
50 |
GPVC33 |
- - - |
33 |
0,7 |
104 |
50 |
- - - |
GPVCS33 |
33 |
1,5 |
197 |
50 |
GPVC38 |
- - - |
38 |
0,7 |
135 |
50 |
- - - |
GPVCS38 |
38 |
1,5 |
225 |
50 |
GPVC40 |
- - - |
40 |
0,7 |
141 |
50 |
- - - |
GPVCS40 |
40 |
1,5 |
241 |
50 |
GPVC45 |
- - - |
45 |
0,7 |
144 |
50 |
- - - |
GPVCS48 |
48 |
1,5 |
282 |
50 |
GPVC50 |
- - - |
50 |
0,7 |
167 |
50 |
GPVC55 |
- - - |
55 |
0,7 |
184 |
50 |
Art.-Nr. |
Außen-Ø x Innen-Ø x Breite |
Öffnungs-Ø |
Tara |
Spulenwickler |
IBP270120200 |
275x125x200 mm |
32 mm |
0,5 kg |
Typ 1, Nr. 12 mit Adapter |
Fassungsvermögen Spule |
|
Schlauch-Ø |
reales Fassungsvermögen m |
2 |
2000 |
2.5 | 1250 |
3 | 900 |
4 | 500 |
5 | 300 |
6 | 200 |
7 | 150 |
8 | 100 |
FR5 |
reales Fassungsvermögen m |
Test - DN2 |
max 200 |
5/32" - DN4 | max 100 |
Art.-Nr. |
AUSSEN-Ø x INNEN-Ø x BREITE |
IBL500160200 |
500x160x200 |
IBL500160300 |
500x160x300 |
IBL700400470 |
700x400x470 |
IBL800400470 |
800x400x470 |
IBLDIN900 |
900x450x470 |
IBLDIN1000 |
1000x500x580 |
IBLDIN1200 |
1200x600x600 |
IBLDIN1400 | 1400x710x750 |
IBLDIN1600 | 1600x710x900 |
Art.-Nr. |
AUSSEN-Ø x INNEN-Ø x BREITE |
IBC470250300 |
470x250x300 |
IBC550400400 |
550x400x400 |
IBC550400500 |
550x400x500 |
IBC800400400 |
800x400x400 |
IBC900550190 |
900x550x190 |
IBC1060600320 |
1060x600x320 |
IBC1060600500 |
1060x600x500 |