Mangueras flexibles PTFE INOXIDABLE Serie IP
HOJA DE DATOS
Code | inch | mm | DN | mm | mm | bar | mm | g/m | Ferrule Code (*) |
PTFE316IP |
3/16" |
4.8 |
5 |
7.4 |
0.7 |
200 |
35 |
69 |
BP316PTFEIP |
PTFE14IP |
1/4" |
6.35 |
6 |
8.9 |
0.7 |
175 |
45 |
87 |
BP14PTFEIP |
PTFE516IP |
5/16" |
8.0 |
8 |
10.9 |
0.7 |
150 |
50 |
127 |
BP516PTFEIP |
PTFE38IP |
3/8" |
9.5 |
10 |
12.4 |
0.7 |
135 |
55 |
145 |
BP38PTFEIP |
PTFE12IP |
1/2" |
12.7 |
12 |
15.7 |
0.7 |
120 |
70 |
212 |
BP12PTFEIP |
PTFE58IP |
5/8" |
16.0 |
16 |
19.1 |
0.7 |
100 |
130 |
260 |
BP58PTFEIP |
PTFE34IP |
3/4" |
19.0 |
19 |
22.2 |
0.8 |
90 |
190 |
321 |
BP34PTFEIP |
PTFE1IP |
1" |
25.4 |
25 |
29.3 |
0.8 |
65 |
270 |
450 |
BP1PTFEIP |
(*) Possibilità di boccole in acciaio inox / Stainless steel ferrules available
Code | inch | - dash | mm | inch | inch | psi | inch | lbs/ft | Ferrule Code (*) |
PTFE316IP |
3/16" |
-3 | 4.8 |
0.29 |
0.027 |
2900 |
1.37 |
0.046 |
BP316PTFEIP |
PTFE14IP |
1/4" |
-4 | 6.35 |
0.34 |
0.027 |
2540 |
1.77 |
0.058 |
BP14PTFEIP |
PTFE516IP |
5/16" |
-5 | 8.0 |
0.43 |
0.027 |
2170 |
1.96 |
0.085 |
BP516PTFEIP |
PTFE38IP |
3/8" |
-6 | 9.5 |
0.47 |
0.027 |
1960 |
2.16 |
0.097 |
BP38PTFEIP |
PTFE12IP |
1/2" |
-8 | 12.7 |
0.61 |
0.027 |
1740 |
2.75 |
0.142 |
BP12PTFEIP |
PTFE58IP |
5/8" |
-10 | 16.0 |
0.75 |
0.027 |
1450 |
5.11 |
0.175 |
BP58PTFEIP |
PTFE34IP |
3/4" |
-12 | 19.0 |
0.87 |
0.031 |
1310 |
7.48 |
0.216 |
BP34PTFEIP |
PTFE1IP |
1" |
-16 | 25.4 |
1.14 |
0.031 |
940 |
10.62 |
0.302 |
BP1PTFEIP |
(*) Possibilità di boccole in acciaio inox / Stainless steel ferrules available
CARACTERÍSTICAS TÉCNICAS
Características técnico-estructurales:
Interior de PTFE y refuerzo de malla de acero inoxidable AISI 304.
Aplicaciones:
Las mangueras de la serie PTFE han sido creadas principalmente para la conducción a alta presión de pinturas, aceites, aire, fluidos de base agua en general y vapor.
Estas mangueras no disipan las cargas electrostáticas en presencia de fluidos no conductivos.
Temperaturas de uso:
De -60 °C a +260 °C
De -76 °F a +500 °F
Especificaciones:
Reg. UE 1935/2004 y Reg. UE 10/2011. FDA 21 CFR 177.1550. D.M. 174 del 06/04/2004 para usar con agua potable.
Es responsabilidad del usuario final verificar la relativa Declaración de Conformidad Alimentaria actualizada en el área reservada.
ESCALA DE CORRECCIÓN DE LA PRESIÓN EN FUNCIÓN DE LA TEMPERATURA
OPCIONAL
Para más información sobre los accesorios opcionales, contacte con la oficina de ventas. (sales@zecspa.com)
ACCESORIOS
Caracterásticas |
Código PMZ46 |
Código PZ46 |
Fuerza de prensado |
100 t |
100 t |
Capacidad |
1" 2sp |
1" 2sp |
Á máx. de prensado |
46 mm * |
46 mm * |
Apertura abrazaderas |
Ø + 20 mm |
Ø + 20 mm |
Empalmes a 90° |
3/8" |
3/8" |
Alimentación neumática |
No |
Max. 7 bar |
DIMENSIONES lxpxh |
300x390x280 mm |
400x390x280 mm |
Peso |
32 kg |
36 kg |
Máx. esfuerzo en la palanca |
30 kg |
--- |
Cilindro efecto individual |
Si |
Si |
Cajón portaabrazaderas |
Si |
Si |
Aceite |
Si |
Si |
Abrazaderas especiales |
Opcional |
Opcional |
Herramienta cambio abrazaderas |
Opcional |
Opcional |
* |
Con abrazaderas especiales |
Con abrazaderas especiales |
Chemical Resistance |
|
Acid, Diluite |
Good |
Acid, Concentrated |
Poor to Fail |
Acid, Organic (diluite) |
Good |
Acid, Organic (concentrated) |
Poor |
Acid, Inorganic |
Fair to Good |
Alcohol’s |
Fair to Good |
Aldehydes |
Poor to fail |
Alkalies, Diluite |
Good |
Alkalies, Concentrated |
Poor to Good |
Amines |
Poor |
Animal & Vegetable Oils |
Good to Excellent |
Brake Fluids, Non-Petroleum Based |
Poor |
Diester Oils |
Fair to |
Esters, Alkyl Phosphate |
Poor |
Esters, Aryl Phosphate |
Poor to Fair |
Ethers |
Poor |
Fuel, Aliphatic Hydrocarbon |
Good to Excellent |
Fuel, Aromatic Hydrocarbon |
Fair to Good |
Fuel, Extended (Oxygenated) |
Fair to Good |
Halogenated Solvents |
Poor |
Hydrocarbon, Halogenated |
Poor to Fair |
Ketones |
Poor |
Lacquer Solvents |
Fair |
LP Gases & Fuel Oils |
Excellent |
Minelal Oils |
Excellent |
Oil Resistant |
Good to Excellent |
Petroleum Aromatic |
Good |
Petroleum Non-Aromatic |
Excellent |
Refrigerant Ammonia |
Good |
Silicone Oil |
Good |
Solvent Resistant |
Good to Excellent |
|
|
Thermal Properties |
|
Low Temperature Range |
- 55°C to - 15°C |
Minimun for Continuous Use (static) |
- 40°C |
Brittle Point |
- 55°C to - 15°C |
High Temperature Range |
+ 100°C to + 125°C |
Maximum for Continuous Use (static) |
+ 125°C |
|
|
Environmental Performance |
|
Colorability |
Excellent |
Flame Resistance |
Poor |
Gas Permeability |
Fair to Excellent |
Odor |
Good |
Ozone Resistance |
Fair to Good |
Oxidation Resistance |
Good |
Radioation Resistance |
Fair to Good |
Steam Resistance |
Fair to Good |
Sunlight Resistance |
Poor to Good |
Taste Retention |
Fair to Good |
Weather Resistance |
Fair to Good |
Water Resistance |
Good to Excellent |
Código artìculo
|
Diámetro externo (mm) |
Espesor medio (mm) |
Ancho banda (mm) |
Peso (g/m) |
Gama de diámetros de los tubos (mm) |
GS128 |
12 |
1,7 |
10 |
46 |
10÷17 |
GS1612 |
16 |
1,8 |
12 |
76 |
12÷22 |
GS2016 |
20 |
1,8 |
14,5 |
86 |
16÷27 |
GS2520 |
25 |
2 |
21 |
112 |
22÷35 |
GS3227 |
32 |
2 |
24 |
177 |
27÷43 |
GS4036 |
40 |
2,5 |
30 |
217 |
33÷55 |
GS5044 |
50 |
3 |
35 |
278 |
42÷64 |
GS6356 |
63 |
3,5 |
40 |
588 |
52÷75 |
GS7567 |
75 |
3,4 |
40 |
813 |
65÷96 |
GS9080 |
90 |
5 |
45 |
1033 |
80÷125 |
GS110100 |
110 |
5,5 |
55 |
1200 |
97÷150 |
Article code |
Width (mm) |
Ø (mm) |
Weight (g/m) |
Lenght (mt) |
GT35* |
35 |
20 |
27 |
100 |
GT40* |
40 |
22 |
32 |
100 |
GT45* |
45 |
25 |
34 |
100 |
GT50* |
50 |
28 |
38 |
100 |
GT55* |
55 |
32 |
42 |
100 |
GT60* |
60 |
35 |
45 |
100 |
GT65* |
65 |
38 |
48 |
100 |
GT80* |
80 |
45 |
60 |
100 |
GT90* |
90 |
50 |
65 |
100 |
GT120* |
120 |
70 |
96 |
100 |
GT150* |
150 |
90 |
112 |
100 |
Ferrule Code |
Dimensions (mm) |
||
d | D | L | |
BPL1922 | 19 | 22 | 25 |
BPL2225 | 22 | 25 | 30 |
BPL2528 | 25 | 28 | 30 |
BPL2730 | 27 | 30 | 33 |
BPL2932 | 29 | 32 | 34 |
BPL3235 | 32 | 35 | 36 |
BPL3538 | 35 | 38 | 36 |
BPL3740 | 37 | 40 | 38 |
BPL3942 | 39 | 42 | 40 |
BPL4245 | 42 | 45 | 42 |
BPL4650 | 46 | 50 | 45 |
BPL5155 | 51 | 55 | 48 |
BPL5660 | 56 | 60 | 50 |
BPL6670 | 66 | 70 | 54 |
BPL7783 | 77 | 83 | 64 |
Características estructurales:
Las fundas textiles GT han obtenido la aprobación Mine Safety and Health Administration del U.S. Department of Labor, con marcado "MSHA IC332-08".
Código artículo |
Á interior (mm) |
Espesor silicona (Min.) (mm) |
Longitud rollos (m) |
GFVS12 |
12 |
1 |
15 |
GFVS15 |
15 |
1 |
15 |
GFVS20 |
20 |
1 |
15 |
GFVS25 |
25 |
1 |
15 |
GFVS30 |
30 |
1 |
15 |
GFVS38 |
38 |
1 |
15 |
GFVS40 |
40 |
1 |
15 |
GFVS45 |
45 |
1 |
15 |
GFVS50 |
50 |
1 |
15 |
GFVS60 |
60 |
1 |
15 |
GFVS65 |
65 |
1 |
15 |
Código artículo |
Á interior (mm) |
Espesor ( (mm) |
Peso (g/m) |
Bobinas (m) |
|
normal |
con espesor reforzado |
||||
GPVC10 |
- - - |
10 |
0,5 |
26 |
125 |
GPVC16 |
- - - |
16 |
0,5 |
39 |
100 |
GPVC18 |
- - - |
18 |
0,5 |
52 |
100 |
GPVC20 |
- - - |
20 |
0,6 |
58 |
100 |
- - - |
GPVCS20 |
20 |
1,5 |
122,5 |
100 |
GPVC22 |
- - - |
22 |
0,6 |
63 |
100 |
- - - |
GPVCS23 |
23 |
1,5 |
140 |
100 |
GPVC25 |
- - - |
25 |
0,6 |
72 |
100 |
- - - |
GPVCS25 |
25 |
1,5 |
151 |
100 |
- - - |
GPVCS27 |
27 |
1,5 |
164 |
100 |
GPVC28 |
- - - |
28 |
0,6 |
82 |
100 |
GPVC30 |
- - - |
30 |
0,6 |
87 |
100 |
- - - |
GPVCS30 |
30 |
1,5 |
180 |
100 |
- - - |
GPVCS32 |
32 |
1,5 |
191 |
50 |
GPVC33 |
- - - |
33 |
0,7 |
104 |
50 |
- - - |
GPVCS33 |
33 |
1,5 |
197 |
50 |
GPVC38 |
- - - |
38 |
0,7 |
135 |
50 |
- - - |
GPVCS38 |
38 |
1,5 |
225 |
50 |
GPVC40 |
- - - |
40 |
0,7 |
141 |
50 |
- - - |
GPVCS40 |
40 |
1,5 |
241 |
50 |
GPVC45 |
- - - |
45 |
0,7 |
144 |
50 |
- - - |
GPVCS48 |
48 |
1,5 |
282 |
50 |
GPVC50 |
- - - |
50 |
0,7 |
167 |
50 |
GPVC55 |
- - - |
55 |
0,7 |
184 |
50 |
Código |
A |
B mm |
C mm |
C mm |
HBR20 | 15.6 | 17.8 | 134 | 15.9 |
HBR40 | 17.0 | 19.2 | 146 | 17.2 |
HBR60 | 19.0 | 21.6 | 163 | 19.3 |
HBR80 | 20.7 | 23.5 | 177 | 21.0 |
HBR100 | 22.1 | 25.3 | 197 | 22.5 |
Còdigo |
Ø Exterior x Ø Interior x Ø Ancho orificio |
Ø Coiler |
Tara |
Bobinadora |
IBP270120200 |
275x125x200 mm |
32 mm | 0,5 kg | Tipo 1 n. 12 con adaptador |
Capacidad bobina |
|
Ø Tubo |
Capacidad real m |
2 |
2000 |
2.5 | 1250 |
3 | 900 |
4 | 500 |
5 | 300 |
6 | 200 |
7 | 150 |
8 | 100 |
FR5 |
Capacidad real m |
Test - DN2 |
max 200 |
5/32" - DN4 | max 100 |
Código |
Ø EXTERIOR x Ø INTERIOR x ANCHO |
IBL500160200 |
500x160x200 |
IBL500160300 |
500x160x300 |
IBL700400470 |
700x400x470 |
IBL800400470 |
800x400x470 |
IBLDIN900 |
900x450x470 |
IBLDIN1000 |
1000x500x580 |
IBLDIN1200 |
1200x600x600 |
IBLDIN1400 | 1400x710x750 |
IBLDIN1600 | 1600x710x900 |
Código |
Ø EXTERIOR x Ø INTERIOR x ANCHO |
IBC470250300 |
470x250x300 |
IBC550400400 |
550x400x400 |
IBC550400500 |
550x400x500 |
IBC800400400 |
800x400x400 |
IBC900550190 |
900x550x190 |
IBC1060600320 |
1060x600x320 |
IBC1060600500 |
1060x600x500 |