ACCESSORIES

• Manual and pneumatic presses »
  ×

  Manual and pneumatic presses

   

  TECHNICAL DATA	Code PMZ47	Code PPZ47
  Crimping force	100 TON (110 US TONS)	100 TON (110 US TONS)
  Capacity	1"	1"
  Ø Maximum Crimping	46 mm * (1.811")	46 mm * (1.811")
  Die Opening	Ø + 20 mm (Ø + 0.788")	Ø + 20 mm (Ø + 0.788")
  90° Fittings	3/8"	3/8"
  DIMENSIONS LxWxH	390x510x300 mm (15.3"x20.7"x11.8")	380x430x400 mm (14.9"x16.9"x15.7")
  Weight	32 kg (71 Lbs)	38 kg (84 Lbs)
  Required effort on the lever	30 kg (66 Lbs)	---
  Pneumatic Input	---	Max. 7 bar (100 psi)
  Cylinder	Single Acting	Singel acting

  INCLUDED ACCESSORIES
  Die holder drawer
  2.5 LT OIL (for pneumatic press)

  DIES	PMZ47 - PPZ47
  Part nr.      MPRESS-	APPZ4710	APPZ4712	APPZ4714	APPZ4716	APPZ4719	APPZ4722	APPZ4725	APPZ4729	APPZ4739
  Die Set Diameter	10	12	14	16	19	22	25	29	39*
  Die Length	55	55	55	55	55	55	65	65	64

  * Die Holder

  OPTIONAL
  Special DIES (diameter 6) Available on request for DN2 hoses	Tool for die change
  Part. n: MPRESSAPPZ476	Part. n: MPZ47UCM

   

• Service Plug »
  ×

  Service Plug

  Chemical Resistance
  Acid, Diluite	Good
  Acid, Concentrated	Poor to Fail
  Acid, Organic (diluite)	Good
  Acid, Organic (concentrated)	Poor
  Acid, Inorganic	Fair to Good
  Alcohol’s	Fair to Good
  Aldehydes	Poor to fail
  Alkalies, Diluite	Good
  Alkalies, Concentrated	Poor to Good
  Amines	Poor
  Animal & Vegetable Oils	Good to Excellent
  Brake Fluids, Non-Petroleum Based	Poor
  Diester Oils	Fair to
  Esters, Alkyl Phosphate	Poor
  Esters, Aryl Phosphate	Poor to Fair
  Ethers	Poor
  Fuel, Aliphatic Hydrocarbon	Good to Excellent
  Fuel, Aromatic Hydrocarbon	Fair to Good
  Fuel, Extended (Oxygenated)	Fair to Good
  Halogenated Solvents	Poor
  Hydrocarbon, Halogenated	Poor to Fair
  Ketones	Poor
  Lacquer Solvents	Fair
  LP Gases & Fuel Oils	Excellent
  Minelal Oils	Excellent
  Oil Resistant	Good to Excellent
  Petroleum Aromatic	Good
  Petroleum Non-Aromatic	Excellent
  Refrigerant Ammonia	Good
  Silicone Oil	Good
  Solvent Resistant	Good to Excellent
  Thermal Properties
  Low Temperature Range	- 55°C to - 15°C
  Minimun for Continuous Use (static)	- 40°C
  Brittle Point	- 55°C to - 15°C
  High Temperature Range	+ 100°C to + 125°C
  Maximum for Continuous Use (static)	+ 125°C
  Environmental Performance
  Colorability	Excellent
  Flame Resistance	Poor
  Gas Permeability	Fair to Excellent
  Odor	Good
  Ozone Resistance	Fair to Good
  Oxidation Resistance	Good
  Radioation Resistance	Fair to Good
  Steam Resistance	Fair to Good
  Sunlight Resistance	Poor to Good
  Taste Retention	Fair to Good
  Weather Resistance	Fair to Good
  Water Resistance	Good to Excellent

• Accessory for mounting Protection spirals »
  ×

  Accessory for mounting Protection spirals
• Hose cutter »
  ×

  Hose cutter

   

  

• Protection spirals »
  ×

  Protection spirals

  Article Code	Internal Diameter (mm)	Outside Diameter (mm)	Wall Thickness (mm)	Strip Width  (mm)	Weight (g/m)	Hose Diameter Range (mm)	Length (m)
  GS0907	7	9	1.0	6.5	22	8÷10	150
  GS128	9.5	12	1.7	10	46	10÷17	50
  GS1612	12.5	16	1.8	12	76	13÷22	50
  GS2016	16	20	1.8	14.5	86	16÷27	50
  GS2520	21	25	2	21	112	21÷35	50
  GS3227	27	32	2	24	177	27÷44	50
  GS4036	34	40	2.5	30	217	34÷55	50
  GS5044	44	50	3	35	278	44÷70	50
  GS6356	55	63	3.5	40	588	55÷87	20
  GS7567	66	75	3.4	40	813	67÷103	20
  GS9080	79	90	5	45	1033	80÷122	20
  GS110100	99	110	5.5	55	1200	100÷152	12
  GS125114	114	125	5.6	55	1638	115÷174	12
  GS140129	129	140	5.6	55	1807	130÷196	8
  GS160148	148	160	6	60	2031	150÷224	6

   

• GT Textile Protection Sheaths »
  ×

  GT Textile Protection Sheaths

  Article code	Width (mm)	Ø (mm)	Weight (g/m)	Lenght (mt)
  GT35*	35	20	27	100
  GT40*	40	22	32	100
  GT45*	45	25	34	100
  GT50*	50	28	38	100
  GT55*	55	32	42	100
  GT60*	60	35	45	100
  GT65*	65	38	48	100
  GT80*	80	45	60	100
  GT90*	90	50	65	100
  GT120*	120	70	96	100
  GT150*	150	90	112	100

  

  Ferrule Code	Dimensions (mm)
  	d	D	L
  BPL1922	19	22	25
  BPL2225	22	25	30
  BPL2528	25	28	30
  BPL2730	27	30	33
  BPL2932	29	32	34
  BPL3235	32	35	36
  BPL3538	35	38	36
  BPL3740	37	40	38
  BPL3942	39	42	40
  BPL4245	42	45	42
  BPL4650	46	50	45
  BPL5155	51	55	48
  BPL5660	56	60	50
  BPL6670	66	70	54
  BPL7783	77	83	64

   

  Technical Features:

  ZEC GT Textile Sleeves are particularly suitable for hydraulic and pneumatic applications, containing single and multiple tubings/hoses. These sheaths show an excellent mechanical resistance and they are compatible with many oils and organic products. GT Textile Sleeves are made in high tensile textile fiber and they guarantee a high resistance to abrasion. As proven by tests made in lab (see Fig. 1), sleeve passes 5000 test cycles in accordance with the UNI ISO 6945 standard.    Temperature range: From -40°C to +100°C (From -40°F to +212°F) The GT Textile Sleeves show an excellent resistance to heat (Softening Point at 150°C) as well as a low thermal conductivity

  Fig. 1 – Abrasion Test in accordance with UNI ISO 6945 Standard.

  Technical Features:   Safety standard ISO 3457:2003GT Textile Sleeves ensure an excellent shielding to oil squirts and this has been proven by a lab tests (Pin Hole Test) performed by carrying a hose up to the burst according to SAE100 J343 standard and by comparing the sleeve condition before the burst (Fig. 2a) and after the burst (Fig. 2b). GT Textile Sleeves work as a protective and containing shield towards the surrounding environment, without highlighting any structural fail. Therefore they grant a good protection in case of accidental tube/hose rupture, in accordance with ISO 3457 safety standard   Tensile braking test ASTM D885​ A further proof on the resistance level of the GT Textile Sleeve is the tensile braking test performed on the sleeve, resulted in accordance with ASTM D885 standard.   UV stabilization GT Textile Sleeves are UV stabilized and they provide an excellent resistance to UVA ageing. The product is therefore suitable for outdoor applications in presence of sunlight and weathering. After testing for 720 hours to UVA rays at 50°C, sleeves haven’t showed any evidence of deterioration or ageing.

  Fig. 2 - a) Before the burst Fig. 2 - (b) After the burst

   

  Applications:

  GT Textile Sleeves have obtained the approval from the Mine Safety and Health Administration by the U.S. Department of Labor with marking "MSHA IC332-08".