STAINLESS STEEL PTFE flexible hose IG Series

ZEC: flexibility for choice

PRESSURE FROM 65 TO 275BAR
LARGE THICKNESS
WORKING TEMPERATURE UP TO 260°C

DATA SHEET

TECHNICAL FEATURES

Oil&Gas High pressure

Air Breathing Air Paints Fuel Other gases Hydraulic oil Oil/grease for lubrication Other oils Water-based fluids Water Hot water/steam Edible products

TECHNICAL FEATURES

Metric
Imperial


Code	inch	mm	DN	mm	mm	bar	mm	g/m	Ferrule Code
PTFE18IG	1/8"	3.2	3	6.7	1.1	275	25	85	BP18OL5
PTFE316IG	3/16"	4.8	4	8.6	1.2	200	50	105	BP316PTFEIP
PTFE14IG	1/4"	6.35	6	9.9	1.2	175	100	126	BP14PTFEIP
PTFE516IG	5/16"	8.0	8	12.0	1.2	150	120	172	BP516PTFEIP
PTFE38IG	3/8"	9.5	10	13.4	1.2	135	130	207	BP38PTFEIP
PTFE12IG	1/2"	12.7	12	16.7	1.2	120	160	293	BP12PTFEIP
PTFE58IG	5/8"	16.0	16	20.1	1.3	100	190	360	BP58PTFEIP
PTFE34IG	3/4"	19.0	19	23.4	1.3	90	200	423	BP34PTFEIP
PTFE1IG	1"	25.4	25	30.3	1.4	65	310	640	BP1PTFEIP


Code	inch	- dash	mm	inch	inch	psi	inch	lbs/ft	Ferrule Code
PTFE18IG	1/8"	-2	3.2	0.26	0.043	3990	0.98	0.057	BP18OL5
PTFE316IG	3/16"	-3	4.8	0.34	0.047	2900	1.37	0.071	BP316PTFEIP
PTFE14IG	1/4"	-4	6.35	0.38	0.047	2540	3.93	0.085	BP14PTFEIP
PTFE516IG	5/16"	-5	8	0.47	0.047	2170	4.72	0.116	BP516PTFEIP
PTFE38IG	3/8"	-6	9.5	0.52	0.047	1960	5.11	0.139	BP38PTFEIP
PTFE12IG	1/2"	-8	12.7	0.65	0.047	1740	6.29	0.197	BP12PTFEIP
PTFE58IG	5/8"	-10	16	0.79	0.051	1450	7.48	0.242	BP58PTFEIP
PTFE34IG	3/4"	-12	19	0.92	0.051	1310	9.00	0.284	BP34PTFEIP
PTFE1IG	1"	-16	25	1.19	0.055	940	12.20	0.430	BP1PTFEIP

TECHNICAL FEATURES

Technical-constructive features:
Inner core in PTFE and reinforcement braid in AISI 304 stainless steel.

Applications:
Hoses of the PTFE series have been created mainly for the high pressure conduction of paints, oils, air, food and steam.
These hoses do not dissipate electrostatic charges when conveying non-conductive fluids.

Working temperature:
From -60°C to +260°C from -76°F to +500°F

Specifications:
Reg. EU 1935/2004, Reg. EU 10/2011. Simulants A, B, C and D1. Standardised testing conditions OM6. Simulant D2 testing conditions OM7.
FDA 21 CFR 177.1550
Italian D.M. 174 of 06/04/2004 for use in drinking water supply chain.

PRESSURE CORRECTION FACTOR ACCORDING TO TEMPERATURE

OPTIONAL

Packing
Long Length

For any further information about the optional items, please contact the sales office ( - )

NORMATIVE

EU 10/2011
EU 1935/2004
FDA 21 CFR

FITTINGS

High pressure »

High Pressure

Fittings for high pressure hoses, made of steel or stainless steel, available both conical and parallel, both male and female, with different bend radii 45°C, 60°C and 90°C.

Discover our full range

Ferrule for stainless steel ptfe tubes of small - medium - large thickness »

Ferrule Code	Hose	Ferrule Dimensions
Ferrule Code	Hose	d	D	L
BP18OL5	1/8"	7,8	11,0	17.2
BP316PTFEIP	3/16"	10,0	14,0	26,0
BP14PTFEIP	1/4"	11,0	15,0	30,0
BP516PTFEIP	5/16"	13,0	17,0	30,0
BP38PTFEIP	3/8"	15,0	19,0	32,0
BP12PTFEIP	1/2"	18.5	24,0	34,0
BP58PTFEIP	5/8"	22,0	28,0	37,0
BP34PTFEIP	3/4"	25,0	30,0	41,0
BP1PTFEIP	1"	32,0	38,0	45,0

ACCESSORIES

PTFE THREAD SEALING TAPE »

PTFE THREAD SEALING TAPE

Manual and pneumatic presses »

TECHNICAL DATA	Code PMZ47	Code PPZ47
Crimping force	100 TON (110 US TONS)	100 TON (110 US TONS)
Capacity	1"	1"
Ø Maximum Crimping	46 mm * (1.811")	46 mm * (1.811")
Die Opening	Ø + 20 mm (Ø + 0.788")	Ø + 20 mm (Ø + 0.788")
90° Fittings	3/8"	3/8"
DIMENSIONS LxWxH	390x510x300 mm (15.3"x20.7"x11.8")	380x430x400 mm (14.9"x16.9"x15.7")
Weight	32 kg (71 Lbs)	38 kg (84 Lbs)
Required effort on the lever	30 kg (66 Lbs)	---
Pneumatic Input	---	Max. 7 bar (100 psi)
Cylinder	Single Acting	Singel acting

INCLUDED ACCESSORIES
Die holder drawer
2.5 LT OIL (for pneumatic press)

DIES	PMZ47 - PPZ47
Part nr. MPRESS-	APPZ4710	APPZ4712	APPZ4714	APPZ4716	APPZ4719	APPZ4722	APPZ4725	APPZ4729	APPZ4739
Die Set Diameter	10	12	14	16	19	22	25	19	39*
Die Length	55	55	55	55	55	55	65	65	64

* Die Holder

OPTIONAL
Special DIES (diameter 6) Available on request for DN2 hoses	Tool for die change
Part. n: MPRESSAPPZ476	Part. n: MPZ47UCM

Service Plug »

Protection spirals »

GT Textile Protection Sheaths »

Article code	Width (mm)	Ø (mm)	Weight (g/m)
GT35	35	20	27
GT40	40	22	32
GT45	45	25	34
GT50	50	28	38
GT55	55	32	42
GT60	60	35	45
GT65	65	38	48
GT80	80	45	60
GT90	90	50	65
GT120	120	70	96
GT150	150	90	112

Silicone Glass Fiber Protection Sheaths »

Article code	Ø Inside (mm)	Silicone thickness (Min.) (mm)	Rolls Length (m)
GFVS12	12	1	15
GFVS15	15	1	15
GFVS20	20	1	15
GFVS25	25	1	15
GFVS30	30	1	15
GFVS38	38	1	15
GFVS40	40	1	15
GFVS45	45	1	15
GFVS50	50	1	15
GFVS60	60	1	15
GFVS65	65	1	15

Normal and thickened PVC Protection Sheaths »

Article code		Ø Inside (mm)	Thickness (mm)	Weight (g/m)	Reels (m)
normal	thickness	Ø Inside (mm)	Thickness (mm)	Weight (g/m)	Reels (m)
GPVC10	- - -	10	0,5	26	150
GPVC16	- - -	16	0,5	39	100
GPVC18	- - -	18	0,5	52	100
GPVC20	- - -	20	0,6	58	100
- - -	GPVCS20	20	1,5	122,5	100
GPVC22	- - -	22	0,6	63	100
- - -	GPVCS23	23	1,5	140	100
GPVC25	- - -	25	0,6	72	100
- - -	GPVCS25	25	1,5	151	100
- - -	GPVCS27	27	1,5	164	100
GPVC28	- - -	28	0,6	82	100
GPVC30	- - -	30	0,6	87	100
- - -	GPVCS30	30	1,5	180	100
- - -	GPVCS32	32	1,5	191	50
GPVC33	- - -	33	0,7	104	50
- - -	GPVCS33	33	1,5	197	50
GPVC38	- - -	38	0,7	135	50
- - -	GPVCS38	38	1,5	225	50
GPVC40	- - -	40	0,7	141	50
- - -	GPVCS40	40	1,5	241	50
GPVC45	- - -	45	0,7	144	50
- - -	GPVCS48	48	1,5	282	50
GPVC50	- - -	50	0,7	167	50
GPVC55	- - -	55	0,7	184	50

Accessory for mounting Protection spirals »

Accessory for mounting Protection spirals

HBR - Hose Bend Restrictors »

Plastic Coils »

Code	Dimensions					Tare
Code	Outside Ø	Inside Ø	Hole Ø	Width	Length	Tare
IBP600310	600 mm	310 mm	80 mm	295 mm	335 mm	6.5 kg

Plastic Coils with cardboard drum »

Code	Dimensions					Tare
Code	Outside Ø	Inside Ø	Hole Ø	Width	Length	Tare
IBP270120200	275 mm	125 mm	32 mm	200 mm	212 mm	0.5 kg

Wooden Coils »

Code	Dimensions					Tare
Code	Outside Ø	Inside Ø	Hole Ø	Width	Length	Tare
IBL500160200	500 mm	160 mm	80 mm	200 mm	220 mm	2.5 kg
IBL500160300	500 mm	160 mm	80 mm	300 mm	320 mm	2.5 Kg
IBL630315335	630 mm	315 mm	80 mm	335 mm	403 mm	8 Kg
IBL700400470	700 mm	400 mm	80 mm	470 mm	500 mm	8 Kg
IBL800400470	800 mm	400 mm	80 mm	470 mm	538 mm	25 Kg
IBLDIN1000	1000 mm	500 mm	80 mm	580 mm	668 mm	54 Kg
IBLDIN1200	1200 mm	600 mm	82 mm	610 mm	644 mm	27 Kg
IBLDIN1400	1400 mm	710 mm	82 mm	750 mm	858 mm	145 Kg
IBLDIN1600	1600 mm	710 mm	82 mm	900 mm	1028 mm	225 Kg

Cardboard Coils »

Code	Dimensions					Tare
Code	Outside Ø	Inside Ø	Hole Ø	Width	Length	Tare
IBC470250300	470 mm	250 mm	40 mm	300 mm	330 mm	0.4 kg
IBC550400400	550 mm	400 mm	60 mm	400 mm	430 mm	1.7 Kg
IBC550400500	550 mm	400 mm	60 mm	500 mm	530 mm	2 Kg
IBC600400400	600 mm	400 mm	60 mm	400 mm	430 mm	1.9 Kg
IBC600400500	600 mm	400 mm	60 mm	500 mm	530 mm	2.1 Kg
IBC800400400	800 mm	400 mm	60 mm	400 mm	430 mm	3.3 Kg
IBC1060600320	1060 mm	600 mm	84 mm	320 mm	350 mm	5.2 Kg
IBC1060600500	1060 mm	600 mm	84 mm	500 mm	530 mm	6 Kg

Search product

News

Certifications

Catalogs

Reserved Area

Focus On

Chemical Resistance
Acid, Diluite	Good
Acid, Concentrated	Poor to Fail
Acid, Organic (diluite)	Good
Acid, Organic (concentrated)	Poor
Acid, Inorganic	Fair to Good
Alcohol’s	Fair to Good
Aldehydes	Poor to fail
Alkalies, Diluite	Good
Alkalies, Concentrated	Poor to Good
Amines	Poor
Animal & Vegetable Oils	Good to Excellent
Brake Fluids, Non-Petroleum Based	Poor
Diester Oils	Fair to
Esters, Alkyl Phosphate	Poor
Esters, Aryl Phosphate	Poor to Fair
Ethers	Poor
Fuel, Aliphatic Hydrocarbon	Good to Excellent
Fuel, Aromatic Hydrocarbon	Fair to Good
Fuel, Extended (Oxygenated)	Fair to Good
Halogenated Solvents	Poor
Hydrocarbon, Halogenated	Poor to Fair
Ketones	Poor
Lacquer Solvents	Fair
LP Gases & Fuel Oils	Excellent
Minelal Oils	Excellent
Oil Resistant	Good to Excellent
Petroleum Aromatic	Good
Petroleum Non-Aromatic	Excellent
Refrigerant Ammonia	Good
Silicone Oil	Good
Solvent Resistant	Good to Excellent

Thermal Properties
Low Temperature Range	- 55°C to - 15°C
Minimun for Continuous Use (static)	- 40°C
Brittle Point	- 55°C to - 15°C
High Temperature Range	+ 100°C to + 125°C
Maximum for Continuous Use (static)	+ 125°C

Environmental Performance
Colorability	Excellent
Flame Resistance	Poor
Gas Permeability	Fair to Excellent
Odor	Good
Ozone Resistance	Fair to Good
Oxidation Resistance	Good
Radioation Resistance	Fair to Good
Steam Resistance	Fair to Good
Sunlight Resistance	Poor to Good
Taste Retention	Fair to Good
Weather Resistance	Fair to Good
Water Resistance	Good to Excellent

Code	A mm	B mm	C mm
HBR10	13.0	15.0	135
HBR20	15.5	16.5	135
HBR40	17.0	18.3	163
HBR100	22.5	24.6	197
HBR120	29.5	34.2	225
HBR140	39.0	41.6	260

Search product

Choose the features

Thermoplastic Hoses - thermoplastikschläuche - tuyaux à pression - tubos termoplásticos

Article Code	Internal Diameter (mm)	Outside Diameter (mm)	Wall Thickness (mm)	Strip Width (mm)	Weight (g/m)	Hose Diameter Range (mm)	Length (m)
GS0907	7	9	1.0	6.5	22	8÷10	150
GS128	9.5	12	1.7	10	46	10÷17	50
GS1612	12.5	16	1.8	12	76	13÷22	50
GS2016	16	20	1.8	14.5	86	16÷27	50
GS2520	21	25	2	21	112	21÷35	50
GS3227	27	32	2	24	177	27÷44	50
GS4036	34	40	2.5	30	217	34÷55	50
GS5044	44	50	3	35	278	44÷70	50
GS6356	55	63	3.5	40	588	55÷87	20
GS7567	66	75	3.4	40	813	67÷103	20
GS9080	79	90	5	45	1033	80÷122	20
GS110100	99	110	5.5	55	1200	100÷152	12
GS125114	114	125	5.6	55	1638	115÷174	12
GS140129	129	140	5.6	55	1807	130÷196	8
GS160148	148	160	6	60	2031	150÷224	6