ACCESSORIES

• Tube clamps »
  ×

  Tube clamps

  Article code	Ø Tube (mm)	A (mm)	B (mm)	C (mm)	D (mm)	Ø (mm)	Positions No.
  SFT4	4	9	114	11,7	8	2,8	10
  SFT6	6	9	114	11,7	10	2,8	10
  SFT8	8	12	143	14,6	12	3,8	10
  SFT10	10	15	172	17,4	13,8	5,3	10
  SFT12	12	19	162	20,5	16,8	5,3	8
  SFT14	14	21	180	22,5	18,8	5,3	4

• Hose cutter »
  ×

  Hose cutter

   

  

• Protection spirals »
  ×

  Protection spirals

  Article Code	Internal Diameter (mm)	Outside Diameter (mm)	Wall Thickness (mm)	Strip Width  (mm)	Weight (g/m)	Hose Diameter Range (mm)	Length (m)
  GS0907	7	9	1.0	6.5	22	8÷10	150
  GS128	9.5	12	1.7	10	46	10÷17	50
  GS1612	12.5	16	1.8	12	76	13÷22	50
  GS2016	16	20	1.8	14.5	86	16÷27	50
  GS2520	21	25	2	21	112	21÷35	50
  GS3227	27	32	2	24	177	27÷44	50
  GS4036	34	40	2.5	30	217	34÷55	50
  GS5044	44	50	3	35	278	44÷70	50
  GS6356	55	63	3.5	40	588	55÷87	20
  GS7567	66	75	3.4	40	813	67÷103	20
  GS9080	79	90	5	45	1033	80÷122	20
  GS110100	99	110	5.5	55	1200	100÷152	12
  GS125114	114	125	5.6	55	1638	115÷174	12
  GS140129	129	140	5.6	55	1807	130÷196	8
  GS160148	148	160	6	60	2031	150÷224	6

   

• GT Textile Protection Sheaths »
  ×

  GT Textile Protection Sheaths

  Article code	Width (mm)	Ø (mm)	Weight (g/m)	Lenght (mt)
  GT35*	35	20	27	100
  GT40*	40	22	32	100
  GT45*	45	25	34	100
  GT50*	50	28	38	100
  GT55*	55	32	42	100
  GT60*	60	35	45	100
  GT65*	65	38	48	100
  GT80*	80	45	60	100
  GT90*	90	50	65	100
  GT120*	120	70	96	100
  GT150*	150	90	112	100

  

  Ferrule Code	Dimensions (mm)
  	d	D	L
  BPL1922	19	22	25
  BPL2225	22	25	30
  BPL2528	25	28	30
  BPL2730	27	30	33
  BPL2932	29	32	34
  BPL3235	32	35	36
  BPL3538	35	38	36
  BPL3740	37	40	38
  BPL3942	39	42	40
  BPL4245	42	45	42
  BPL4650	46	50	45
  BPL5155	51	55	48
  BPL5660	56	60	50
  BPL6670	66	70	54
  BPL7783	77	83	64

   

  Technical Features:

  ZEC GT Textile Sleeves are particularly suitable for hydraulic and pneumatic applications, containing single and multiple tubings/hoses. These sheaths show an excellent mechanical resistance and they are compatible with many oils and organic products. GT Textile Sleeves are made in high tensile textile fiber and they guarantee a high resistance to abrasion. As proven by tests made in lab (see Fig. 1), sleeve passes 5000 test cycles in accordance with the UNI ISO 6945 standard.    Temperature range: From -40°C to +100°C (From -40°F to +212°F) The GT Textile Sleeves show an excellent resistance to heat (Softening Point at 150°C) as well as a low thermal conductivity

  Fig. 1 – Abrasion Test in accordance with UNI ISO 6945 Standard.

  Technical Features:   Safety standard ISO 3457:2003GT Textile Sleeves ensure an excellent shielding to oil squirts and this has been proven by a lab tests (Pin Hole Test) performed by carrying a hose up to the burst according to SAE100 J343 standard and by comparing the sleeve condition before the burst (Fig. 2a) and after the burst (Fig. 2b). GT Textile Sleeves work as a protective and containing shield towards the surrounding environment, without highlighting any structural fail. Therefore they grant a good protection in case of accidental tube/hose rupture, in accordance with ISO 3457 safety standard   Tensile braking test ASTM D885​ A further proof on the resistance level of the GT Textile Sleeve is the tensile braking test performed on the sleeve, resulted in accordance with ASTM D885 standard.   UV stabilization GT Textile Sleeves are UV stabilized and they provide an excellent resistance to UVA ageing. The product is therefore suitable for outdoor applications in presence of sunlight and weathering. After testing for 720 hours to UVA rays at 50°C, sleeves haven’t showed any evidence of deterioration or ageing.

  Fig. 2 - a) Before the burst Fig. 2 - (b) After the burst

   

  Applications:

  GT Textile Sleeves have obtained the approval from the Mine Safety and Health Administration by the U.S. Department of Labor with marking "MSHA IC332-08".

      

• Normal and thickened PVC Protection Sheaths »
  ×

  Normal and thickened PVC Protection Sheaths

  Article code		Ø Inside (mm)	Thickness (mm)	Weight (g/m)	Reels (m)
  normal	thickness
  GPVC10	- - -	10	0,5	26	125
  GPVC16	- - -	16	0,5	39	100
  GPVC18	- - -	18	0,5	52	100
  GPVC20	- - -	20	0,6	58	100
  - - -	GPVCS20	20	1,5	122,5	100
  GPVC22	- - -	22	0,6	63	100
  - - -	GPVCS23	23	1,5	140	100
  GPVC25	- - -	25	0,6	72	100
  - - -	GPVCS25	25	1,5	151	100
  - - -	GPVCS27	27	1,5	164	100
  GPVC28	- - -	28	0,6	82	100
  GPVC30	- - -	30	0,6	87	100
  - - -	GPVCS30	30	1,5	180	100
  - - -	GPVCS32	32	1,5	191	50
  GPVC33	- - -	33	0,7	104	50
  - - -	GPVCS33	33	1,5	197	50
  GPVC38	- - -	38	0,7	135	50
  - - -	GPVCS38	38	1,5	225	50
  GPVC40	- - -	40	0,7	141	50
  - - -	GPVCS40	40	1,5	241	50
  GPVC45	- - -	45	0,7	144	50
  - - -	GPVCS48	48	1,5	282	50
  GPVC50	- - -	50	0,7	167	50
  GPVC55	- - -	55	0,7	184	50